DSO082 is specified as 10MHz analog bandwidth but its actual -3db bandwidth is closed to 15MHz by real measurement and design.
Up to 50Msps real-time sampling rate and 10mV/Div sensitivity enable the unit to carry out plenty of daily measurements for a regular electronic engineer or DIYer.
Thanks to ample tactile controls and rotary encoder operations of DSO082 are straightforward and easy--there is no annoying menu navigation which is usually found with other portable oscilloscopes.
Features also packed within the gadget include 1024-point FFT, USB connection, capture save/recall,
adjustable memory size, rugged enclosure, and more. Firmware is field upgradable through a simple USB cable.
10X/1X switchable
BNC probe
and universal
power adapter are included.
Features
10MHz analog bandwidth and higher
50Msps real-time sampling rate
Vertical sensitivity 10mV/Div to 5V/Div
Record length 2000 - 16000 points adjustable
Trigger position adjustable and trig point indicated
Up to 10x zoom-in in HOLD state
Save/Recall up to 4 captures
Screen image hardcopy via USB
Firmware upgradable via USB
FFT with selectable length of 256, 512, or 1024 points and sampling rate from 1KSps to 50MSps
Quick operation by keypad/rotary encoder combination. No annoying menu navigating
Rugged enclosure
Dimension: 140mm X 70mm X 30mm
Weight: 150 gram (not including probe and power adapter)
Ordering Info
Sku Number
08202
Contents
One DSO082 oscilloscope
One BNC probe (20MHz, 1x and 10x switchable)
[photo]
One AC/DC univeral power adapter (choice of North American
[photo]
or European
[photo] style plug)
Manual of Operation (English)
Documents, firmwares, and tools:
Specification
Vertical
Number of Channel: One
Analog Bandwidth: 0 - 10MHz
Sensitivity: 10mV/Div -- 5V/Div
Resolution: 8-bit
Input Impedance: 1M ohm
Maximum Input voltage: 50Vpk (for 1X probe)
Coupling: DC, AC, GND
Horizontal
Max Real-time Sampling Rate: 50MSps
Timebase: 0.2us/Div - 10s/Div
Record Length: 2000 - 16000 points user selectable
Zoom-in: Up to 10X in HOLD mode
Run/Hold Modes: one button switchable
Trigger
Trigger Modes: Auto, Normal, Single
Trigger Types: Rising/falling edge
Trigger Sources: Internal/external
Trigger Position: Adjustable
Trig Point Indicator: Yes
Other Features
Save/Recall up to 4 captures
Screen image hardcopy
USB connection for data transfer and firmware upgrade
FFT with selectable length of 256, 512, or 1024 points and sampling rate from 1KSps to 50MSps
Rotary encoder for quick parameter setting
Display
2-inch 128 X 64 black-and-white dot-matrix LCD
Backlight ON/OFF control
Contrast adjustable
Power Supply
9V AC/DC power adapter
Supply voltage range: 8 - 12V
Supply Current: 300mA (LCD backlight ON, typical)
Reverse polarity and over-voltage protected
Physical
Dimension: 140mm X 70mm X 30mm
Weight: 150 gram (not including probe and power adapter)
* Thank Mr. M. Fernando from England, UK!
Mr. Fernando helped us to correct language errors and refine many phrases in this document.
