Right half of display garbled

Anything about this unique oscilloscope DIY kit

Re: Right half of display garbled

Postby rahe55 » Sat Oct 06, 2018 3:07 pm

Thank you for reply .

Will check pdf when time allows.

Actually the problem with my DSO068 is SOLVED now.

I just started up my windows computer (i am on MacOs normally) - first connected to DSO068 via USB / JyeLab , and that worked flawlessly. Nice piece of software showing the traces on the large computer screen.

Then downloaded and installed software tool / firmware from your webpage and flashed latest firmware into DSO068.

After that update device works as expected . Obviously something was wrong in the firmware despite showing latest version on booting before update already.

Thank you for all help and support anyway Ralf
rahe55
 
Posts: 15
Joined: Mon Apr 30, 2018 2:12 pm

Re: Right half of display garbled

Postby Tora » Thu Apr 11, 2019 9:17 am

Yep, jye1, I was just going to double check most critical points. It looks like timing and CS1 are OK (a rough check on CS2 also looks fine). In case I end up in LCD replacement that would not be a big problem. I've already checked availability of similar LCD's on the market mega moolah
. OK, I cross my fingers and start digging into the PCB. Let's have some more fun. =)
Let's get dolphins game
 today
Tora
 
Posts: 3
Joined: Tue Feb 06, 2018 1:34 pm

Previous

Return to DSO 068

Who is online

Users browsing this forum: No registered users and 3 guests

cron