callibration problems 15001k

callibration problems 15001k

Postby BJ2275 » Fri Jul 13, 2018 3:53 am

Hi, just built the 15001k oscilloscope kit, checked all the voltages and all were perfect, however, when I try to callibrate there is no trace that resembles a square wave just a (fuzzy line) which does change slightly when I adjust the caps.
when I built the kit i tested all the components with a tester and all were good except, on testing the 1pf capacitor, my tester returned (damaged or unknown part) I assumed that 1pf may have been out of its measurement range....... I would be very greatfull for any input / help cheers
BJ2275
 
Posts: 1
Joined: Tue Jul 10, 2018 5:20 am

Return to DSO Shell

Who is online

Users browsing this forum: No registered users and 5 guests