DSO 094 (Dual channel)

DSO 094 Dual Channel Oscilloscope

This product has been discontinued.

Highlights of DSO094:

10MHz analog bandwidth
50Msps real-time sampling rate on each channel
Vertical sensitivity 10mV/Div to 2V/Div (1X probe) and 0.1V/Div to 20V/Div (10X probe)
Record length 500 – 8000 points on each channel adjustable
Trigger position adjustable and trig point indicated
Trigger sensitivity 0.2div – 4div adjustable
Save/Recall up to 4 captures of maximum record length
Screen image hardcopy via USB
Firmware upgradable via USB
Battery/USB powered
Dimension: 140mm X 70mm X 30mm
Weight: 190 gram (excluding probe and battery)

See more pictures:
Y/T Mode / Y/X Mode: Lissajous (1) / Y/X Mode: Lissajous (2)

PC Oscilloscope

DSO 094 can also be used as PC oscilloscope with support of jyeLab. For details please see jyeLab. 094 firmware must be upgraded to version 113-09401-050 or later in order to work as PC oscilloscope.

Specification

Vertical

Number of Channel: 2
Analog Bandwidth: 0 - 10MHz
Sensitivity: 10mV/Div -- 2V/Div
Resolution: 8-bit
Input Impedance: 1M ohm
Maximum Input voltage: 50Vpk (for 1X probe) and 400Vpk (for 10X probe)
Coupling: DC, AC, GND

Horizontal

Max Real-time Sampling Rate: 50MSps
Timebase: 0.2us/Div - 10m(minute)
Record Length: 500 - 8000 points (each channel) changeable
Run/Hold Modes: one button switchable

Trigger

Trigger Modes: Auto, Normal, Single
Trigger Types: Rising/falling edge
Trigger Sources: Ch 1 or Ch 2
Trigger sensitivity 0.2div - 4div adjustable
Trigger Position: 0% - 100% of capture buffer adjustable
Trig Point Indicator: Yes

Additional Features

Y/T mode and Y/X mode selectable
Save/Recall up to 4 captures
Screen image hardcopy
USB connection for data transfer and firmware upgrade
Rotary encoder for quick parameter setting

Display

2-inch 128 X 64 black-and-white dot-matrix LCD
Backlight ON/OFF control
Contrast adjustable

Power Supply

3.7V Li-ion battery/USB
Supply Current: 300mA @ 3.7V(LCD backlight ON, typical)
Built-in charger

Physical

Dimension: 140mm X 70mm X 30mm
Weight: 190 gram (including battery)

Documents:

Users Manual
How to Calibrate 10X Probe
How to Upgrade Firmware by Bootloader
Powering JYE Tech Oscilloscopes With Cellphone Batteries
Virtual COM Port driver (for Uart - USB bridge CP210X)

Firmwares:

Main: 113-09401-060 [ 2013.03.19 ]
Key Pad: 113-09402-020 [ 2012.05.25 ]
Bootloader: 113-09403-030 [ 2012.05.25 ]
(See revision history)